噴漆表面自干油墨,自干噴漆表面油墨
概述:高級自干油墨,漆膜堅硬、柔韌光亮豐滿,保護性及遮蓋力特佳,機械性強,顏色鮮艷持久 由多種改良耐候樹脂組成,高品質,遮蓋力強。優良的附著力及層間密著性,為涂裝作了物理性能的良好基礎。
本信息已過期,發布者可在"已發商機"里點擊"重發"。
品牌:歐萊斯
一. 產品名稱: PU自干漆 雙組份自干油漆 聚氨酯亮光油墨 平光油墨 啞光油墨
二.主要特性:
高級自干油墨,漆膜堅硬、柔韌光亮豐滿,保護性及遮蓋力特佳,機械性強,顏色鮮艷持久 由多種改良耐候樹脂組成,高品質,遮蓋力強。優良的附著力及層間密著性,為涂裝作了物理性能的良好基礎。
三.產品特征:
1.飽滿度光亮度優異;
2.顏色鮮艷、遮蓋力特佳;
3.耐候性、耐黃變性好、耐酸堿性優異;
4.干燥速度快,流平性佳;
5.施工性能好,不易受高溫潮溫天氣影響.
四.施工參數:
1.預涂底材必須除去塵土、油污、銹蝕。
2.調配噴涂前應嚴格按照標簽標示的比例調配。用多少配多少,以免成浪費。
施工比例:油漆:固化劑:稀釋劑=2:1:2
3.地心力噴槍(上壺)直徑1.5-1.7mm,壓力0.4-0.6Mpa,建議涂裝2道。
4.本產品噴涂后常溫2-4小時可干燥,實干12-24小時。
五.貯存于運輸:
產品在運輸中應防止雨淋、日光曝曬,應存放在陰涼、干燥、通風的庫內,并防止日光直接照射,隔絕火源,遠離熱源。
六.規格及保質期:
產品在封閉原包裝的條件下,貯存期自生產完成并檢驗合格之日起為一年。
Brand: oleser
Product Name: PU. A self dry paint two-component polyurethane paint dry matte ink ink light ink light
Two. Main characteristics:
The advanced self drying ink is hard, flexible, bright, plump, protective and covering. It is strong in mechanical and colorful. It is made of many improved weather resistant resins, and has high quality and strong covering power. The good adhesion and interlayer density are the good basis for the physical properties of the coating.
Three. Product characteristics:
1. full degree of light is excellent;
2. bright color and excellent cover force.
3. weathering resistance, yellow denaturation and excellent acid and alkaline resistance.
4. the drying speed is fast and the flow leveling is good.
5. good construction performance, not easy to be affected by high temperature and temperature weather.
Four. Construction parameters:
1. pre coating material must remove dust, oil and rust.
2. before spraying, the spraying should be made in strict proportion to the proportion indicated by the label. How much to use, so as not to be a waste.
Construction ratio: Paint: curing agent: diluent =2:1:2
3. geocentric gun (upper pot) diameter 1.5-1.7mm, pressure 0.4-0.6Mpa, it is recommended to paint 2.
4. this product can be dried at normal temperature for 2-4 hours after spraying, and dry for 12-24 hours.
Five. Stored in transport:
Products should be prevented from rain and sun exposure during transportation. They should be stored in a cool, dry and ventilated storehouse, and prevent direct sunlight exposure, so as to keep away from fire sources and away from heat sources.
Six. Specifications and warranty period:
Under the condition of closed original packing, the storage period is one year from the date of completion of production and the date of inspection.


[本信息來自于今日推薦網]
一. 產品名稱: PU自干漆 雙組份自干油漆 聚氨酯亮光油墨 平光油墨 啞光油墨
二.主要特性:
高級自干油墨,漆膜堅硬、柔韌光亮豐滿,保護性及遮蓋力特佳,機械性強,顏色鮮艷持久 由多種改良耐候樹脂組成,高品質,遮蓋力強。優良的附著力及層間密著性,為涂裝作了物理性能的良好基礎。
三.產品特征:
1.飽滿度光亮度優異;
2.顏色鮮艷、遮蓋力特佳;
3.耐候性、耐黃變性好、耐酸堿性優異;
4.干燥速度快,流平性佳;
5.施工性能好,不易受高溫潮溫天氣影響.
四.施工參數:
1.預涂底材必須除去塵土、油污、銹蝕。
2.調配噴涂前應嚴格按照標簽標示的比例調配。用多少配多少,以免成浪費。
施工比例:油漆:固化劑:稀釋劑=2:1:2
3.地心力噴槍(上壺)直徑1.5-1.7mm,壓力0.4-0.6Mpa,建議涂裝2道。
4.本產品噴涂后常溫2-4小時可干燥,實干12-24小時。
五.貯存于運輸:
產品在運輸中應防止雨淋、日光曝曬,應存放在陰涼、干燥、通風的庫內,并防止日光直接照射,隔絕火源,遠離熱源。
六.規格及保質期:
產品在封閉原包裝的條件下,貯存期自生產完成并檢驗合格之日起為一年。
Brand: oleser
Product Name: PU. A self dry paint two-component polyurethane paint dry matte ink ink light ink light
Two. Main characteristics:
The advanced self drying ink is hard, flexible, bright, plump, protective and covering. It is strong in mechanical and colorful. It is made of many improved weather resistant resins, and has high quality and strong covering power. The good adhesion and interlayer density are the good basis for the physical properties of the coating.
Three. Product characteristics:
1. full degree of light is excellent;
2. bright color and excellent cover force.
3. weathering resistance, yellow denaturation and excellent acid and alkaline resistance.
4. the drying speed is fast and the flow leveling is good.
5. good construction performance, not easy to be affected by high temperature and temperature weather.
Four. Construction parameters:
1. pre coating material must remove dust, oil and rust.
2. before spraying, the spraying should be made in strict proportion to the proportion indicated by the label. How much to use, so as not to be a waste.
Construction ratio: Paint: curing agent: diluent =2:1:2
3. geocentric gun (upper pot) diameter 1.5-1.7mm, pressure 0.4-0.6Mpa, it is recommended to paint 2.
4. this product can be dried at normal temperature for 2-4 hours after spraying, and dry for 12-24 hours.
Five. Stored in transport:
Products should be prevented from rain and sun exposure during transportation. They should be stored in a cool, dry and ventilated storehouse, and prevent direct sunlight exposure, so as to keep away from fire sources and away from heat sources.
Six. Specifications and warranty period:
Under the condition of closed original packing, the storage period is one year from the date of completion of production and the date of inspection.




- ks888888發布的信息
- 噴塑表面自干油墨,自干噴塑表面油墨
- 1.飽滿度光亮度優異; 2.顏色鮮艷、遮蓋力特佳; 3.耐候性、耐黃變性好、耐酸堿性優異; 4.干燥速度快,流平性佳; 5.施工性能好,不易受高溫潮溫天氣影響....
- 噴塑表面移印油墨,移印噴塑表面油墨
- 不銹鋼油漆的漆膜干燥快,附著力好,耐熱性、耐候性能好,具有較好的戶外耐久性,可在較低氣溫條件下應用。...
- 噴塑表面絲印油墨,絲印噴塑表面油墨
- 歐萊斯S60使用說明 產品種類 高級進口樹脂研磨而成 產品特性 單組份、免烘烤、自干、耐酒精、耐酸堿、耐汽油、附著牢固、快速自干、可彌補產品表面不平整的缺陷。...
- 塑膠電鍍件表面移印油墨
- ■ 主要特性 1)可耐多次酸性蝕刻。 2)退膜速度快,此特性可確保板材在退膜過程中免受堿液攻擊。 3)固化后玻璃表面具有優良的附著力和抗劃傷性。...
- 塑膠電鍍件表面絲印油墨
- 1.特性:MPA系列是一款適合印刷在UV表面、真空鍍表面、金屬等光滑材質表面的絲、移英特耐磨溶劑型油墨; 2.適應范圍: 特別適合印刷在UV表面、真空鍍表面、金屬等光滑材質表面。...
- 五金鍍鋅油墨 五金表面鍍鋅油墨
- 1. 適用范圍:電鍍、 鐵、鋁及鋁氧化表面、不銹鋼機烤漆等材料。 2. 油墨特性:固化后對極性底材具有優異的附著力,洗滌精、耐酒精效果好;墨層均勻,顏料分散性好,過網性、流平性良好,涂膜具有較高的...
油墨重發信息
- 廠家生產白色養殖尼龍網 養殖防蟲絲網 塑料網 材質規格齊全
- 應用于水性油墨的水性聚氨酯樹脂
- 美國Taber5135耐磨試驗機
- 可程序紫外線老化試驗箱
- 安徽HC-631-UV紫外加速老化試驗箱批發價格
- HC-708汽車內飾PP塑料件儲物盒植絨膠水
- DISK3cc靜電輸漆齒輪泵圓形涂料齒輪泵浦
- 潤華國際物流提供油漆油墨涂料出口新加坡走化工物流專線渠道
- 標準光源對色燈箱/四光源對色燈箱
- 西格里EK60浸漬石墨材料 樹脂耐磨石墨EK60
- 美孚D130 無味油墨溶劑 液體噴霧溶劑
- 上海回收丙烯酸異辛酯公司電話
- 上海回收四氫呋喃價格公司電話
- PCB三防漆測厚儀 電路板UV膠厚度測量儀 油墨測厚儀
- 油漆防霉劑iHeir-YQ底漆面漆均可添加 268/千克起訂