粘合機帶的種類：無接縫（ptfe）粘合機帶、有接縫粘合機帶、雙層復合機帶等 PTFE無接縫粘合機帶： 無縫帶采用高強度玻璃纖維紗或凱芙拉（芳綸）經圓織設備編織筒狀織物，采用獨特的工藝技術涂覆特氟龍樹脂（PTFE）制成的。它克服以往輸送帶接口連接處易斷裂的現象。連接處周長不等而造成走行穩定性差、跑偏現象。無縫粘合機帶運轉壽命比任何接法的特氟龍輸送帶壽命都要長3倍以上。 粘合機帶的耐溫范圍：長時間工作-70至320℃ 無接縫粘合機帶主要性能特點： 　　 1、用于低溫-196℃，高溫300℃之間，具有耐氣候性,抗老化。經實際應用,如在250℃高溫情況下，連續放置200天，不但強度不會變低，而且重量也不減少；在350℃ 高溫下放置120個小時，重量只減少0.6%左右；在-180℃超低溫情況下并可保持原有的柔軟性。 　　2 、非粘著性：表面光滑,不易粘附任何物質。易于清洗附著其表面的各種油漬、污點或其它附著物；漿糊、樹脂、涂料等幾乎所有粘著物質都可簡單地清除； 　　3、耐化學腐蝕，能耐強酸、強堿、王水及各種有機溶劑的腐蝕。 　　4、耐藥劑性、無毒性。幾乎可耐所有藥劑物品. 　　5、具有高絕緣性能（介電常數�。�2.6，正切在0.0025以下）、防紫外線、防靜電。 　　6、使用方便、使用壽命長。 　　7、尺寸穩定性好（延伸系數小于5‰）、強度高。具有良好的機械特性。 　　8、抗彎曲疲勞，可用于較小輪徑。 　　9、防火阻燃 粘合機帶應用范圍： 　　A：廣泛應用于帶式壓燙粘合襯布的機械配套 　　B： 各種食品烘焙、冷凍食品解凍（米飯、年糕、糖果等） 　　C：各種電子元件焊接輸送機械配套 　　D： 工業藥品、橡塑膠片、電器零件熱處理、耐熱及非粘著的特殊條件運輸帶 　　E： 汽車零件的防銹粘結劑涂履運輸、帶有酸、堿、及其腐蝕物品的運輸帶 粘合機帶規格：帶子“寬度、長度、厚度”可根據客戶要求定做。 粘合機帶顏色：棕、黑 粘合機帶周長：主要特長：1、進行過防靜電處理 2、耐熱性能好3、抗沾性好4、走行穩定性好 5、耐久性好 6、容易維修 規格(mm)：公稱厚度(0.220/0.245/0.280/0.385) 寬度(400－1200) 周長(1360－7000) 序號 型號 規格 適用機型 1 400 400×1520/1830MM 頂峰，佳友，佳田，威士，羽島,王子 2 450 450×1530/1830MM 威士，頂峰，佳田，羽島 3 460 460×1530/1830MM 佳友，宏光，鮑魚 4 500 500×1530/1880MM（1830MM、2450MM） 佳田，威士，佳暉，王子，海濱，方圓、佳友、捷威 5 500 500×1735/2020MM 佳田 6 600 600×2440MM（2675MM） 威士，佳田，羽島，頂峰， KDK（ 佳友，新楓） 7 600 600×2100/4200MM 佳友 8 600 600×1400/2000MM 鮑魚 9 700 700×2450/2890MM 威捷 10 900 900×2450MM 佳田，威士，佳暉，佳友，頂峰 11 915 915×2450/3540MM 重機 12 1000 1000×3950/6730MM 佳友 13 1000 1000×3200MM 羽島 14 1010 1010×3200/6000MM（2830/4720MM） 15 1000*3890/4510 威士NHJ-Q-1000A Teflon seamless fusing machine belt.PTFE Teflon Seamless Fusing Belt/Hashima/Oshima/Meyer/Martin/Malkan Fusing Belt.. Teflon seamless fusing machine belt.PTFE Teflon Seamless Fusing Belt/Hashima/Oshima/Meyer/Martin/Malkan Fusing BeltTeflon seamless fusing machine belt/PTFE Endless Fusing Belt Teflon Seamless Fusing Belts are made of high strength fiberglass or Keviar,knitted by special equipment and coated with Teflon resin in high temperature. Seamless belts solve the problems of traditional fusing belts with joint such as bad stability, ruptures and deflecting for different girth on two sides at the joint. The seamless fusing belts have a smooth surface,excellent antistatic effect, long life using etc.advantages that other seam fusing belts don’t have .. We suuply several types fusing machine belt 1. PTFE seamless fusing machine belt: the belt is made of high tensile fiberglass or Kevlar, knitted by special equipment and coated with fine PTFE. Seamless belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt are much longer than all kinds of joint PTFE Fusing Machine Belt. 2.2ply fusing machine belt: with static-resistance varnished cloth inside and tearing-resistance fiberglass cloth outside, 2ply belt has a great improvement on its intensity, long using life, well balanced thickness, excellent deflecting preventing capacity, smooth surface, its better for super thin fabric fusing. 3.Common seam fusing machine belt: Seam fusing machine belt is made of fine material. The surface is smooth and luster and the price is competitive. It can substitute imported high price belts. Features of PTFE fusing machine belt: 1)High temperature resistance and adherence resistance; 2)Good tensile strength, preventing deflecting; 3)Excellent capability of resistance of static; 4)mooth surface, more suits for super thin lining; 5)Flex fatigue resistance, durable, long using life;[本信息來自于今日推薦網]